Saturday, July 23, 2011

Rule of Rigging

So I am about to start another Nieuport 17.  I still have an Academy Nieport 17 kit but this one will be the original from Hobby Craft that I picked up on eBay for $11.
2011_0723Image0024
You can see that the box is beat up and in terrible shape; but the insides are all there and look to be in good condition.
2011_0723Image0023

I have spent the last two days making turnbuckles and other parts for rigging.  In working on my last biplane I quickly came up with a rule of thumb for rigging:
Figure out how many parts your build will require; then double it!
When this rule is followed you save a great deal of agony from tweezer launches and feedings of the carpet monster.  On my first build I started to get a little frustrated when I would loose a rigging part and have to make another then loose the new part as well.  I took a break for a couple days, made up plenty of extras and went back to having fun.

While the partial buckles I used in the last model were acceptable, I feel that they are missing something.  So this time I am using full buckles and connecting them to the plane with partial buckles to get a more accurate effect.
2011_0723Image0011
Here are my new turnbuckles.
2011_0723Image0016
Here are some turnbuckles with mounting tails attached. I have used 0.5mm (0.3mm ID) brass pipe and 34 gauge (0.16mm) wire to make these.  I am hoping to get some 0.4mm (0.2mm ID) pipe from my local hobby shop soon (it is on back order).  I want to use that with some 38 gauge (0.1mm) wire to make smaller turnbuckles for the rudder cables and the interior support.  If it doesn't arrive in time I will use one size throughout.

Lastly here is a picture of me taken by my three year old son.
2011_0723Image0020

Friday, July 22, 2011

Last Words

So my first Nieuport 17 is finished and hanging from the boys ceiling.
2011_0713Image0023
2011_0713Image0024
2011_0713Image0020
It isn't a piece of art and it would never win a prize; but it was a lot of fun to build a I learned a great deal doing it.
2011_0713Image00122011_0713Image0009
2011_0713Image00062011_0713Image0010
Here are some close ups showing off my turnbuckles and my wood grain painting.
2011_0713Image00072011_0713Image0005
2011_0713Image0004
These shots show off a little of the cockpit detail.  More of the cockpit is visible then I thought; so I am glad I put some extra effort into it.

After I hung this up; my wife asked if I could "cover the whole ceiling with planes?" >grin< I told her that I would be happy to but that I will have to build them first...

She also suggested doing one in pink for Sonya's room.  I have an odd Spad XXIII kit that might just look good in pink.  But first I have a couple more Nieuport 17s to build; and maybe a Sopwith Pup; then there is my thought of doing an Albatros D.Va for the model show in September...

Tuesday, June 14, 2011

Top Up, or Bottom Down?

I haven't been diligent about posting lately but I have been working.  Between annual reviews at work and installing a laundry line and a new mailbox at home I have been very busy.

I was sadly disappointed with the control stick that came with the model.  It was very thin and didn't go together well at all.  I ended up making my own with brass tubing and rod and a little CA.
2011_0614Image00032011_0614Image0006
I had a plentiful amount of Titanium Silver so I used that instead of Flat Aluminium.  The colors are pretty close so I was happy with the result.  The fuselage had some issues with seams, it took plenty of sanding and a little putty.  I got rid of the back seam, but the belly is still noticeable.  I will have to take greater care in joining the halves next time.

So far things are looking very good.
2011_0614Image0012
Here is a decent shot of the cockpit;
2011_0614Image0018
I have not added instruments at this time.  I ordered some instrument bezels from AirScale but instead of 1/32 and 1/48, I was sent 1/48 and 1/72.  DOH!  I am not sure if its worth complaining.
2011_0614Image0014
I really like this shot, it shows some nice detail on the propeller.

2011_0614Image00082011_0614Image0009
The wings are in a camo pattern.  The color guide didn't offer much so I tried to match my memories of the colors on the Spad VII at the AirZoo.  For the Green I mixed about 3:1 Field Grey and Olive Green the brown is just Flat Brown with a few drops (3) of Flat Black to darken it.  I am very happy with these results.
Now comes time for a big decision...  do I rig from the top down or from the bottom up?  The turn buckles are all on the lower surfaces, so I decided to do top down.  Since I think it will be easier to work around the turnbuckles.
2011_0614Image0021
Here is the lower wing with two turnbuckles installed, you can also see two turnbuckles in the fuselage.
2011_0614Image0020
Here is the underside of the upper wing.  I had an inspiration to mix 4mm and 1mm sections of tubing to bind the rigging.  After looking at rigging on planes I think this mix will give a more realistic final product.

Thursday, May 26, 2011

Not a Throne...

Not a lot of modeling progress.  I did manage to clean up the garage enough to finally park both cars inside.  That was a HUGE accomplishment!  I re primed all the non-wood grain parts black;
2011_0526Image0001
This should get them ready for the aluminium finish.

I used a little Milli-put to try to make a seat cushion.  This was my first try with this and it is a little old but I think it turned out pretty good.  We will have to see how it paints up.
2011_0526Image0002
This is my rough shape I added some creases and buttons.
2011_0526Image0004
Here I added some piping with 32gauge (0.2mm) wire; this was attached with a little CA.
2011_0526Image0006
The final result before it is painted.

Sunday, May 22, 2011

Details, Details

So I have started adding some small details to the Nieuport 17.  As I have stated previously I have decided to use one sided turnbuckles.  There is an eyelet on one end and a nice tail to trim and glue on the other.
2011_0522Image0016
I drilled out small holes with a 0.3mm drill bit and glued in turnbuckles on one end and eyelets on the other.

2011_0522Image00072011_0522Image0014
Threading the line through the eyelets takes a little skill and a great deal of patience.  There are several great guides to this process available so I skipped over some of the details.  The guide at http://www.ww1aircraftmodels.com/ is about the closest to how I did mine.

I won't be working on the wing struts for a while, but before I put them away I thought they could use a bit of detail as well.  I took a bit of lead foil and trimmed it to width using the part as a guide.
2011_0522Image0023
Then I carefully glued into place with CA and a straight pin and trimmed to fit.
2011_0522Image0025
2011_0522Image0026
Repeat five more times and it almost looks like metals bands reinforcing the struts...
2011_0522Image0019
Now its time to put this away, clean up the rest of the wood grain pieces and prepare for my aluminium finish.

Friday, May 20, 2011

Nieuport 17

So it begins;  I have spent some time making turnbuckles.  I decided to use one sided buckles.  I washed the sprues and primed.  I have started to add Lacquer Thinner to my Acrylic paint to give it a little more bite.  I am still undecided about this technique.  I usually prime in white or black.  This time due to the need for some wood grain effects (very little on this Nieuport) I tried a prime of Desert Yellow XF-59.
2011_0520Image0014
2011_0520Image0013
 I have also tried my first attempt at simulating wood grain.  I have seen a couple pictures that looked like a lite-colored plywood on the interior.  So I did a mix of 2:1:1 Yellow Ochre: Burnt Sienna: Burnt Umber.  I 'varnished' with Future and added a drop of Clear Yellow.  I believe that my Clear Yellow has gone bad it doesn't mix completely and seems to periodically clog my airbrush.  It looks a little lighter then I intended and I may do it again, I will definitely go darker on the propeller.
2011_0520Image0016
2011_0520Image0018
I didn't bother with the ejector pin marks or the 'detail' inside because I don't believe it will be at all visible.  I know this isn't a good approach, but I am pressed for time and I am using this kit as a learning experience and not to win any prizes...
2011_0520Image0021
Definitely need to go darker here.
2011_0520Image00362011_0520Image0033

So far this looks like a nice little kit and I am looking forward to doing more.

Friday, May 13, 2011

Buckle Up!

It has been a while since my last post.  Nice weather means yard work....  Decaling on the C-47 is going slow.  The decals are awful; I think that it is mostly their age but I have had a lot of cracking and the glue is leaving smudges.  I gave up on the SoluSol and have just been using SoluSet to finish them off.

On the brighter side; I decided on my next project; I picked up a couple Academy Nieuport 17 kits for $15 each and thought that they would make a good break-in to WWI aircraft.  I will need 18 turnbuckles so to speed things up I made a jig to cut the brass pipe.

2011_0510Image00132011_0510Image0014
I collected a couple plastic blocks (Legos) from the boys toybox.  I also got some 0.05 brass sheet for the stops and a plastic card to use as a cutting surface.  I used my smallest Dremel drill bit 1/32 about 0.7mm to drill four holes each in two opposite sides.
2011_0510Image00152011_0510Image0016
I cut the plastic card to fit.  I also removed the inner ridges on one of the sides with holes.  I cut the brass sheet to the same width as the block.  This gave me 1mm on each side to fold to improve the fit.  The sides of the block are 1mm thick so I installed the brass sheet flush to the inside edge on one side and glued into place with CA.
2011_0510Image0017
The other brass sheet was folded and wedged between the inner ridges and the center post.  This gives a depth of 4mm.
2011_0510Image0018
Everything was glued together with CA.  With a little care I can make four pieces at a time.  Clamping the jig to the table helps a great deal!
2011_0510Image0019
Here are my 1mm pieces for the cable clamps.
2011_0510Image0020
Here are the 4mm pieces for the turnbuckles.

2011_0510Image0022
Here is my two year old daughter being a ham...

I have decided to do one sided turnbuckles.  I am using 34gauge (0.16mm) wire for the turnbuckles using 0.5mm brass pipe.  I also have 38gauge (0.1mm) wire but it looked too small in the 0.5mm pipe.  I picked up NiCr wire from Ebay http://stores.ebay.com/jacobsonline and it is a dream to work with for twisting buckles.  He also has 36gauge (0.13mm) wire and I would really like to see if that would fit inside some 0.4mm pipe.  The sticking point is finding the 0.4mm pipe right now.

I have also thought about trying the 38gauge NiCr wire for my rigging instead of monofillament.  It will depend on how tight I can pull it...