Monday, August 1, 2011

Horns and Pullies

I have started adding eyelets for my rigging on the wings, and begun the interior rigging in the cockpit as well.  I tried to create a pully system for the rudder cables.

2011_0801Image0016
Here is the interior rigging on the starboard side.  I added the cable behind the seat as well since area was visible in my last model.

2011_0801Image0019
I started making a pully using some larger diameter sprue and a hole-punch on some brass sheet.  It looked good but was much too large.  I ended up with a small bit of an air release tab and a much smaller piece of brass.  I drilled a 0.5mm hole through everying and then used a broken bit of a 0.3mm drill bit as an axel.  It doesn't look as nice; but I think the size is much closer.

2011_0801Image0022
I used a drop of CA to mount this in the front of the cockpit.  I know it isn't centered; but since I build the interior into the starboard side it will make things easier to rig.


This is another discovery; rigging holes in the horns.  Once again I am not certain if I didn't notice these before or if they are just missing from the Academy molding.  I drilled the holes through with a 0.3mm drill bit to prepare these for rigging.

2011_0801Image0014
Here are the control horns with cableing attached.  I used my standard 2lb line colored silver with a Sharpie marker.  I plan on adding turnbuckles to these lines so I just left each with a 3 inch tail.  I hope this will give me enough to work with.

2011_0801Image0024
I added the throtle control to the port side interior.  I did want to have it inside of the rigging so I put it in first.  Now that I look at it; I think I want the rigging to pass under the throtle control.  This may pose some problems.  I still have to rig the port side interior then start putting the interior parts together.

I am trying to decide if I want the control cable to run all the way through the fuselage or just have them end under the seat...  I will have to decide before I complete the interior so you should know by my next posting.

Wednesday, July 27, 2011

A Second Try at Details

I have to start off with a correction and a recommendation.  I mentioned a couple months ago that I ordered photoetch instrument bezels from AeroClub and was sent 1:72 instead of 1:32.  I decided that it was important to me to get the right parts so I emailed John.  I was willing to pay for shipping and to return the 1:72 bezels; but he said no and sent me the correct part right away.  If you are even considering build WWI aircraft (or WWII for that matter) I strongly encourage you to pick up these extras.  You will not regret it!

2011_0727Image0016
So here are my Airscale instrument decals and my AeroClub bezels.  The decals are very accurate, but since this will be hanging from my sons ceiling I have gone for looks over accuracy.

2011_0727Image0012
These were trimmed off some sprue from my extras box.  I believe they are the air release holes but they are nicely oversized compared to the rest of the sprue.

2011_0727Image0014
I sanded the rough spots and brush painted with Tamiya X31 Titanium Gold.  This is the Wingnut wings recommendation for brass parts.  When the paint was dried I airbrushed on some Future to prepare for decals.

 2011_0727Image0018
So here they are more or less finished.  Only one decal is actually an altimeter and it is German.  But they look good.  I did tweak the decal on the right as I was adding the bezel but that is why I did two.  I have also added some Future to act as the instrument glass.  Overall I am very happy with the results.

2011_0727Image0013
I am not sure if you can tell; but I did a wash of Vallejo Oily Steel on the engine.  Mostly I am including another shot here because I am so damn happy with how it turned out! >grin<  While I am a huge fan of Tamiya paints especially when airbrushing; I really love Vallejo paints for brushwork and washes.  I just wish I had a local source for more of these.

2011_0727Image00012011_0727Image0002
I am not so proud of this wood grain.  I read of some people using acrylics for the wood grain and thought to give it a try.  I was not pleased.  I went back with oils, but the clean-up from the acrylics did more damage to my base coat then I realized.

2011_0727Image00062011_0727Image0004
I am happy with the wood grain on the propeller.  I still have no idea how some manage a two tone effect here, but I will figure that one out...  The picture on the right also shows where I had to fill in the sinkholes.
2011_0727Image00032011_0727Image0032
I went with a darker wood grain on the spars this time.  I am much happier with this effect.  I again did the lead foil wraps instead of using the decals that come with the kit.  I think the substance of the lead foil just adds a more realism.

2011_0727Image00262011_0727Image0021
Here is my seat.  I have noticed that the belts on all the kits seem very wide.  I think I over did the effect here but I will work on this with future models.  The seat cushion turned out well.  I did a leather color XF52 Flat Earth (again from the Wingnut directions) then I dipped it in the same wash that I used on the engine.  Finally I did a drybrush of Red Brown XF64 to finish it off and a little Future to protect it. 
I took a great deal more care with the wheels on this project.  They were pretty much just thrown on the last plane.  I airbrushed the centers then brushed XF69 Nato Black for the rubber (Wingnut Wings again).   Its funny how you can be perfectly happy with Flat Black for tires until you see something that is better.  WOW again I am amazed out how a little color change can make such a huge difference.

The heat wave has come to an end so I will probably be crawling out of the basement and tackling my honey-dos for a while.  Hopefully this will give me some time for my 0.4mm brass tube to come in.

Sunday, July 24, 2011

Rotary Redux

I took some extra time cleaning up the interior.  Since I will be adding the internal rigging I don't need the mold lines.
2011_0724Image00052011_0724Image0003

I made an interesting discovery; I don't know if it because this is an older molding or if I just didn't notice it on the Academy model but there are marking for the holes in the seat back.  Of course I had to make use of them.
2011_0724Image00092011_0724Image0014

My seat cushion isn't looking as nice this time.  I hope that after painting and remembering to add a seat belt it will still look good.
2011_0724Image0027

I jumped ahead to the engine.  I felt inspired after reading the instructions for my Sopwith Pup from Wingnut Wings.  They use a bit more color on their engine so I thought I would give it a try.  This is the biggest difference; the copper exhaust.
2011_0724Image0037

I don't know if it is appropriate for a Nieuport but I like the way it looks.  I also thought I would give spark plug wires a try this time.  I colored my rigging line (2lb fishing line) black with a Sharpie and attached it with CA.  I actually dipped the line into the CA and then as I held it in place ran a drop of accelerator down the line help it stick.
2011_0724Image0033

Here are a couple shots of the finished product.  I am really surprised what a difference a little color and some fishing line can make.
2011_0724Image0038
2011_0724Image0040

Finding the markings on the seat back was a nice surprise; finding sinkholes in the propeller wasn't.  So I will fill and sand and fill and sand then maybe I will do some wood grain...

Saturday, July 23, 2011

Rule of Rigging

So I am about to start another Nieuport 17.  I still have an Academy Nieport 17 kit but this one will be the original from Hobby Craft that I picked up on eBay for $11.
2011_0723Image0024
You can see that the box is beat up and in terrible shape; but the insides are all there and look to be in good condition.
2011_0723Image0023

I have spent the last two days making turnbuckles and other parts for rigging.  In working on my last biplane I quickly came up with a rule of thumb for rigging:
Figure out how many parts your build will require; then double it!
When this rule is followed you save a great deal of agony from tweezer launches and feedings of the carpet monster.  On my first build I started to get a little frustrated when I would loose a rigging part and have to make another then loose the new part as well.  I took a break for a couple days, made up plenty of extras and went back to having fun.

While the partial buckles I used in the last model were acceptable, I feel that they are missing something.  So this time I am using full buckles and connecting them to the plane with partial buckles to get a more accurate effect.
2011_0723Image0011
Here are my new turnbuckles.
2011_0723Image0016
Here are some turnbuckles with mounting tails attached. I have used 0.5mm (0.3mm ID) brass pipe and 34 gauge (0.16mm) wire to make these.  I am hoping to get some 0.4mm (0.2mm ID) pipe from my local hobby shop soon (it is on back order).  I want to use that with some 38 gauge (0.1mm) wire to make smaller turnbuckles for the rudder cables and the interior support.  If it doesn't arrive in time I will use one size throughout.

Lastly here is a picture of me taken by my three year old son.
2011_0723Image0020

Friday, July 22, 2011

Last Words

So my first Nieuport 17 is finished and hanging from the boys ceiling.
2011_0713Image0023
2011_0713Image0024
2011_0713Image0020
It isn't a piece of art and it would never win a prize; but it was a lot of fun to build a I learned a great deal doing it.
2011_0713Image00122011_0713Image0009
2011_0713Image00062011_0713Image0010
Here are some close ups showing off my turnbuckles and my wood grain painting.
2011_0713Image00072011_0713Image0005
2011_0713Image0004
These shots show off a little of the cockpit detail.  More of the cockpit is visible then I thought; so I am glad I put some extra effort into it.

After I hung this up; my wife asked if I could "cover the whole ceiling with planes?" >grin< I told her that I would be happy to but that I will have to build them first...

She also suggested doing one in pink for Sonya's room.  I have an odd Spad XXIII kit that might just look good in pink.  But first I have a couple more Nieuport 17s to build; and maybe a Sopwith Pup; then there is my thought of doing an Albatros D.Va for the model show in September...

Tuesday, June 14, 2011

Top Up, or Bottom Down?

I haven't been diligent about posting lately but I have been working.  Between annual reviews at work and installing a laundry line and a new mailbox at home I have been very busy.

I was sadly disappointed with the control stick that came with the model.  It was very thin and didn't go together well at all.  I ended up making my own with brass tubing and rod and a little CA.
2011_0614Image00032011_0614Image0006
I had a plentiful amount of Titanium Silver so I used that instead of Flat Aluminium.  The colors are pretty close so I was happy with the result.  The fuselage had some issues with seams, it took plenty of sanding and a little putty.  I got rid of the back seam, but the belly is still noticeable.  I will have to take greater care in joining the halves next time.

So far things are looking very good.
2011_0614Image0012
Here is a decent shot of the cockpit;
2011_0614Image0018
I have not added instruments at this time.  I ordered some instrument bezels from AirScale but instead of 1/32 and 1/48, I was sent 1/48 and 1/72.  DOH!  I am not sure if its worth complaining.
2011_0614Image0014
I really like this shot, it shows some nice detail on the propeller.

2011_0614Image00082011_0614Image0009
The wings are in a camo pattern.  The color guide didn't offer much so I tried to match my memories of the colors on the Spad VII at the AirZoo.  For the Green I mixed about 3:1 Field Grey and Olive Green the brown is just Flat Brown with a few drops (3) of Flat Black to darken it.  I am very happy with these results.
Now comes time for a big decision...  do I rig from the top down or from the bottom up?  The turn buckles are all on the lower surfaces, so I decided to do top down.  Since I think it will be easier to work around the turnbuckles.
2011_0614Image0021
Here is the lower wing with two turnbuckles installed, you can also see two turnbuckles in the fuselage.
2011_0614Image0020
Here is the underside of the upper wing.  I had an inspiration to mix 4mm and 1mm sections of tubing to bind the rigging.  After looking at rigging on planes I think this mix will give a more realistic final product.