Sunday, February 12, 2012

Instrumental Interlude

Since my instrument panel was devoured by the carpet monster I had to build a new one.
I took the early version panel and scraped it clean.

2012_0212Image0009
I then added some wood grain and picked out my bezels.

2012_0212Image0010
I wanted to leave the center bezel brass but in the end I decided to follow the directions.

2012_0212Image0015
Decals were added and a couple layers of Future to simulate glass.

2012_0212Image0017
2012_0212Image0020
Finally the installation.  The fuselage is still just a dry fit.

Thursday, February 9, 2012

Fixing Mistakes...

I have just about completed the internal assembly.  It would have been done now but I had to fix some mistakes.

2012_0209Image0051

This was my first time using weathering powders.  I tried powders from AIM in Wisconsin http://www.aimprodx.com/ not very expensive and nice to work with.  Of course with many first time adventures I got carried away and used a bit too much rust.  So after I finished I went over it with a wash from Citadel Paints and then touched up with a bit of pastel chalk.


I just realized that I the seat was supposed to be leather and not wood... DOH!  So I did a little compromise and added a bit of leather trim.

2012_0209Image0064
2012_0209Image0063
2012_0209Image0062
2012_0209Image0061
2012_0209Image00572012_0209Image0056
2012_0209Image00552012_0209Image0054
The cockpit is now complete with the exception of the control panel.  I was working on wood grain for this and lost it in a tweezer launch.  Fortunately the kit comes with two and the early version will be more conducive to using my bezels from Aeroclub.

2012_0209Image00682012_0209Image0067
2012_0209Image00662012_0209Image0065
I have primed the fuselage and the wings.  Since this is not the final color and I had some old paint to use up I took a bit of liberty.  The instructions call for a 2:1 mix of XF-16 (Flat Aluminium) and XF-19 (Sky Gray); I did a 1:1 mix of XF-16 and XF-20 (Medium Gray).

I will be working on my control panel (and looking for the other) then I will start painting the fuselage.

Monday, February 6, 2012

Internal Structure

The Internal structure is finally coming together.  I am still doing some dry fitting just to see how it fits.




2012_0206Image0010
I added some control wires.  This was mostly to stop the stick from flopping around. I am now working on the ammo box.

2012_0206Image0012
2012_0206Image0014
The ammo box is just set into place because it needs some more parts attached and a bit of roughing up.  I do have the seatbelt harness in place now; what a pain that was to install...

2012_0206Image0019
2012_0206Image0027
I now have the engine set in mostly for balance.  It won't be permanent until after some weathering.

Saturday, February 4, 2012

Engine Details

I saw a diorama many years ago where the modeller took Skoal Bandits and soaked them in diluted Elmer's White Glue to make sand bags.  They looked amazing when they were finished.  This stuck with me and I when I thought there should be some asbestos tape on my engine I knew just how to do it.

2012_0205Image00022012_0205Image0003
I cleaned out some used tea bags and cut them into strips about 1/8 in (3mm) wide.  I added a drop of Vallejo oily steal to some Elmer's White Glue and watered it down.  The strips were dipped in this and wrapped around the manifold.


This was a little rough.  I found it worked best if I tore the strips down to a length of about an inch on more (about 30mm).  I used a old brush to apply some more white glue to smooth down the rough spots.

2012_0205Image0013
2012_0205Image0010
2012_0205Image0011
2012_0205Image0012
This is my engine before any weathering.  I don't plan on making it too dirty; just a little grime and a lite wash.

I have also done some more seat cushions.  They didn't turn out as good as my last batch but I got one decent one out the group.
2012_0205Image0007
I need to fine some tools for detailing the Milliputty and I think I need some Milliputty that isn't six years old as well.  It is a little difficult to work with.

2012_0205Image0008
My one good cushion in its seat ready to be glued down. 

Things are moving right along now, and I should have the internal structure completed soon.  I will have to work on my seat belts next.

Sunday, January 29, 2012

Two Paths

One very nice feature to this model from WingNut Wings is that is is actually several small models in one.  So while I wait for glue to set or paint to dry; I can easily work on another portion.  I have again made some seat cushions out of Milliput.  I am not thrilled with those results at the moment but I will see how they look after some sanding and paint.

2012_0127Image00042012_0127Image0013
This is a better shot of my spark plugs.  The second set turned out better.  I have done some work on the cylinder head.

2012_0129Image0001
2012_0129Image0003
Work on the engine is coming along nicely.  While it is not perfect; I am happy with the results so far.

2012_0129Image0017
2012_0129Image0018
2012_0129Image0022
While taking a break from the engine, I have continued work on the internal structure of the cockpit.  This is just a dry fit since I want to install the seat and probably the seat belts before I close this all up.

Thursday, January 26, 2012

Back to Work

Well I have been away for a while.  Holidays, computer crashes, missing supplies have all contributed to keeping me busy with other things.  I haven't done a thing on my Pfalz in months.  Fortunately the group build has been extended for a month so I have a chance of getting it done.

I started working on the cockpit.
2012_0126Image0046

It is amazing how well this kit is engineered.  There are many very small and very detailed parts and they all just drop together.

I am making my first try at spark plugs.
2012_0126Image0043

I used 0.4mm brass tube and the same line that I use for rigging.  I also used nuts from VectorCut.  I have switched to brass tube from Albion Alloys it is a very nice product.  I have installed these in the engine so one side is done.
2012_0126Image0060

I left the 'wires' plain thinking a copper effect would be nice, but now I think I need to blacken them.

This is it for now; more to come soon.

Wednesday, September 7, 2011

Blown Engine...

What a misadventure this has been.  I trimmed some bits of wound guitar string to use as the valve springs on the engine.  I had strings that were 1.1mm and 0.92mm.  I used the larger first but they were too big and very tough to grind down to size with the dremel (several were sent flying off to feed the carpet monster).   After three trys I gave up and went to the smaller size.  This looks better and I was able to mostly grind them down to size without too many flying away.  (This time it only took two trys.)  I did do some damage to the cylinder head as well but it is all repairable.


Here are a couple shots.  The second has the rocker arm dry fit.  I think a little more grinding is required then I will have to repaint everything.  Another method I have read about is to make my own wrapped wire by covering a 24 gauge (0.5mm) core with a 30 gauge (0.25mm) wire.  By using something softer like my NiChrome or Copper it should be much easier to get to size.  Also I can mount it with a 0.5mm hole instead of filling the cylinder head with 1mm holes that weaken the structure.

On a lighter note; here are some final shots of my Nieuport 17 all dirtied up.




Here are some shots of the weathering.


Here she is in her final display above my son's bed.  I figure a dozen more planes and their ceiling will be full >grin< but by that time some of these early attempts may very well 'disapear'.